код системной ошибки 0x00000430

Как исправить ошибку 0x80070043 в Windows 7, 8.1 и 10?

Некоторые пользователи утверждают, что наталкиваются на ошибку 0x80070043, когда пытаются получить доступ к файлу, хранящемся на другом компьютере в сети, либо во время запуска определенных приложений, например, из пакета Windows Office. Данная ошибка наиболее часто возникает на Windows Vista и Windows 7, но ее появление также возможно на Windows 8.1 и Windows 10.

Причины появления ошибки 0x80070043

Решение ошибки 0x80070043

Метод №1 Включение «Всегда ждать сеть при запуске и входе в систему»

Если вы сталкиваетесь с подобной ошибкой в доменном пространстве, то вам необходимо убедиться, что в вашей системе разрешена передача файлов по SMB. Для этого вам нужно получить доступ к редактору локальных групповых политик и проверить, включена ли политика «Всегда ждать сеть при запуске и входе в систему».

Чтобы сделать это, вам необходимо придерживаться следующих шагов:

Метод №2 Очистка папки «Temp» в безопасном режиме

Подобный код может появляться перед пользователем Windows по причине возникновения условной ошибки в папке %temp%. Достаточно очистить данную папку от ее содержимого, чтобы разрешить условную ошибку и избавиться от кода 0x80070043.

Вот что вам потребуется сделать:

Проверьте наличие ошибки 0x80070043.

Метод №3 Запуск DISM и SFC

Некоторые пользователи, столкнувшиеся с ошибкой, утверждают, что им удалось побороть ее при помощи таких системных средств, как DISM и SFC. Проще говоря, ошибка 0x80070043 может возникать в случае повреждения некоторых системных файлов.

Знайте, что DISM использует Центр обновления (WU) для замены поврежденных компонентов системы, в то время как SFC для восстановления найденных повреждений задействует локальные бэкап копии необходимых файлов. Для нормальной работы DISM потребуется надежное Интернет-подключение.

Чтобы запустить в работу DISM и SFC, вам необходимо сделать следующее:

Теперь попробуйте выполнить нужное вам действие, например, получить доступ к какому-то удаленному файлу, и проверьте, исчезла ли ошибка 0x80070043.

Метод №4 Восстановление системы

В очень редких случаях подобная ошибка может быть результатом вмешательства стороннего ПО в работу системы. Если вы испытываете появление данного кода лишь с недавнего времени, то есть смысл попробовать воспользоваться точкой восстановления.

В этом окошке вам необходимо выбрать точку, на время создания которой ошибки 0x80070043 не наблюдалось, и запустить восстановление системы. При выполнении этого процесса ваш ПК может перезагружаться, но переживать не стоит, потому как это вполне нормально.

Источник

Как исправить ошибку во время выполнения 430

Проверка «Class doesn’t support Automation»

Ошибка 430 может столкнуться с пользователями Windows Operating System, если они регулярно используют программу, также рассматривается как «Not all objects expose an Automation interface.». Во время возникновения ошибки 430 конечный пользователь может сообщить о проблеме в Microsoft Corporation. Затем Microsoft Corporation будет иметь знания, чтобы исследовать, как и где устранить проблему. Если есть уведомление об обновлении Windows Operating System, это может быть решением для устранения таких проблем, как ошибка 430 и обнаруженные дополнительные проблемы.

Что вызывает ошибку времени выполнения 430?

«Class doesn’t support Automation» чаще всего может возникать при загрузке Windows Operating System. Мы можем определить происхождение ошибок ошибки 430 во время выполнения следующим образом:

В большинстве случаев проблемы с файлами Class doesn’t support Automation связаны с отсутствием или повреждением файла связанного Windows Operating System вредоносным ПО или вирусом. Как правило, любую проблему, связанную с файлом Microsoft Corporation, можно решить посредством замены файла на новую копию. В некоторых случаях реестр Windows пытается загрузить файл Class doesn’t support Automation, который больше не существует; в таких ситуациях рекомендуется запустить сканирование реестра, чтобы исправить любые недопустимые ссылки на пути к файлам.

Типичные ошибки Class doesn’t support Automation

Наиболее распространенные ошибки Class doesn’t support Automation, которые могут возникнуть на компьютере под управлением Windows, перечислены ниже:

Эти сообщения об ошибках Microsoft Corporation могут появляться во время установки программы, в то время как программа, связанная с Class doesn’t support Automation (например, Windows Operating System) работает, во время запуска или завершения работы Windows, или даже во время установки операционной системы Windows. Документирование проблем Class doesn’t support Automation в Windows Operating System является ключевым для определения причины проблем с электронной Windows и сообщения о них в Microsoft Corporation.

Создатели Class doesn’t support Automation Трудности

Проблемы Class doesn’t support Automation могут быть отнесены к поврежденным или отсутствующим файлам, содержащим ошибки записям реестра, связанным с Class doesn’t support Automation, или к вирусам / вредоносному ПО.

В основном, осложнения Class doesn’t support Automation связаны с:

Совместима с Windows 2000, XP, Vista, 7, 8, 10 и 11

Источник

System Error Codes (1000-1299)

This information is intended for developers debugging system errors. For other errors, such as issues with Windows Update, there is a list of resources on the Error codes page.

The following list describes system error codes for errors 1000 to 1299. They are returned by the GetLastError function when many functions fail. To retrieve the description text for the error in your application, use the FormatMessage function with the FORMAT_MESSAGE_FROM_SYSTEM flag.

ERROR_STACK_OVERFLOW

Recursion too deep; the stack overflowed.

ERROR_INVALID_MESSAGE

The window cannot act on the sent message.

ERROR_CAN_NOT_COMPLETE

Cannot complete this function.

ERROR_INVALID_FLAGS

ERROR_UNRECOGNIZED_VOLUME

The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.

ERROR_FILE_INVALID

The volume for a file has been externally altered so that the opened file is no longer valid.

ERROR_FULLSCREEN_MODE

The requested operation cannot be performed in full-screen mode.

ERROR_NO_TOKEN

An attempt was made to reference a token that does not exist.

ERROR_BADDB

The configuration registry database is corrupt.

ERROR_BADKEY

The configuration registry key is invalid.

ERROR_CANTOPEN

The configuration registry key could not be opened.

ERROR_CANTREAD

The configuration registry key could not be read.

ERROR_CANTWRITE

The configuration registry key could not be written.

ERROR_REGISTRY_RECOVERED

One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.

ERROR_REGISTRY_CORRUPT

The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system’s memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.

ERROR_REGISTRY_IO_FAILED

An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system’s image of the registry.

ERROR_NOT_REGISTRY_FILE

The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.

ERROR_KEY_DELETED

Illegal operation attempted on a registry key that has been marked for deletion.

ERROR_NO_LOG_SPACE

System could not allocate the required space in a registry log.

ERROR_KEY_HAS_CHILDREN

Cannot create a symbolic link in a registry key that already has subkeys or values.

ERROR_CHILD_MUST_BE_VOLATILE

Cannot create a stable subkey under a volatile parent key.

ERROR_NOTIFY_ENUM_DIR

A notify change request is being completed and the information is not being returned in the caller’s buffer. The caller now needs to enumerate the files to find the changes.

ERROR_DEPENDENT_SERVICES_RUNNING

A stop control has been sent to a service that other running services are dependent on.

ERROR_INVALID_SERVICE_CONTROL

The requested control is not valid for this service.

ERROR_SERVICE_REQUEST_TIMEOUT

The service did not respond to the start or control request in a timely fashion.

ERROR_SERVICE_NO_THREAD

A thread could not be created for the service.

ERROR_SERVICE_DATABASE_LOCKED

The service database is locked.

ERROR_SERVICE_ALREADY_RUNNING

An instance of the service is already running.

ERROR_INVALID_SERVICE_ACCOUNT

The account name is invalid or does not exist, or the password is invalid for the account name specified.

ERROR_SERVICE_DISABLED

The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

ERROR_CIRCULAR_DEPENDENCY

Circular service dependency was specified.

ERROR_SERVICE_DOES_NOT_EXIST

The specified service does not exist as an installed service.

ERROR_SERVICE_CANNOT_ACCEPT_CTRL

The service cannot accept control messages at this time.

ERROR_SERVICE_NOT_ACTIVE

The service has not been started.

ERROR_FAILED_SERVICE_CONTROLLER_CONNECT

The service process could not connect to the service controller.

ERROR_EXCEPTION_IN_SERVICE

An exception occurred in the service when handling the control request.

ERROR_DATABASE_DOES_NOT_EXIST

The database specified does not exist.

ERROR_SERVICE_SPECIFIC_ERROR

The service has returned a service-specific error code.

ERROR_PROCESS_ABORTED

The process terminated unexpectedly.

ERROR_SERVICE_DEPENDENCY_FAIL

The dependency service or group failed to start.

ERROR_SERVICE_LOGON_FAILED

The service did not start due to a logon failure.

ERROR_SERVICE_START_HANG

After starting, the service hung in a start-pending state.

ERROR_INVALID_SERVICE_LOCK

The specified service database lock is invalid.

ERROR_SERVICE_MARKED_FOR_DELETE

The specified service has been marked for deletion.

ERROR_SERVICE_EXISTS

The specified service already exists.

ERROR_ALREADY_RUNNING_LKG

The system is currently running with the last-known-good configuration.

ERROR_SERVICE_DEPENDENCY_DELETED

The dependency service does not exist or has been marked for deletion.

ERROR_BOOT_ALREADY_ACCEPTED

The current boot has already been accepted for use as the last-known-good control set.

ERROR_SERVICE_NEVER_STARTED

No attempts to start the service have been made since the last boot.

ERROR_DUPLICATE_SERVICE_NAME

The name is already in use as either a service name or a service display name.

ERROR_DIFFERENT_SERVICE_ACCOUNT

The account specified for this service is different from the account specified for other services running in the same process.

ERROR_CANNOT_DETECT_DRIVER_FAILURE

Failure actions can only be set for Win32 services, not for drivers.

ERROR_CANNOT_DETECT_PROCESS_ABORT

This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service’s process terminates unexpectedly.

ERROR_NO_RECOVERY_PROGRAM

No recovery program has been configured for this service.

ERROR_SERVICE_NOT_IN_EXE

The executable program that this service is configured to run in does not implement the service.

ERROR_NOT_SAFEBOOT_SERVICE

This service cannot be started in Safe Mode.

ERROR_END_OF_MEDIA

The physical end of the tape has been reached.

ERROR_FILEMARK_DETECTED

A tape access reached a filemark.

ERROR_BEGINNING_OF_MEDIA

The beginning of the tape or a partition was encountered.

ERROR_SETMARK_DETECTED

A tape access reached the end of a set of files.

ERROR_NO_DATA_DETECTED

No more data is on the tape.

ERROR_PARTITION_FAILURE

Tape could not be partitioned.

ERROR_INVALID_BLOCK_LENGTH

When accessing a new tape of a multivolume partition, the current block size is incorrect.

ERROR_DEVICE_NOT_PARTITIONED

Tape partition information could not be found when loading a tape.

ERROR_UNABLE_TO_LOCK_MEDIA

Unable to lock the media eject mechanism.

ERROR_UNABLE_TO_UNLOAD_MEDIA

Unable to unload the media.

ERROR_MEDIA_CHANGED

The media in the drive may have changed.

ERROR_BUS_RESET

The I/O bus was reset.

ERROR_NO_MEDIA_IN_DRIVE

ERROR_NO_UNICODE_TRANSLATION

No mapping for the Unicode character exists in the target multi-byte code page.

ERROR_DLL_INIT_FAILED

A dynamic link library (DLL) initialization routine failed.

ERROR_SHUTDOWN_IN_PROGRESS

A system shutdown is in progress.

ERROR_NO_SHUTDOWN_IN_PROGRESS

Unable to abort the system shutdown because no shutdown was in progress.

ERROR_IO_DEVICE

The request could not be performed because of an I/O device error.

ERROR_SERIAL_NO_DEVICE

No serial device was successfully initialized. The serial driver will unload.

ERROR_IRQ_BUSY

Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.

ERROR_MORE_WRITES

A serial I/O operation was completed by another write to the serial port. The IOCTL_SERIAL_XOFF_COUNTER reached zero.)

ERROR_COUNTER_TIMEOUT

A serial I/O operation completed because the timeout period expired. The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)

ERROR_FLOPPY_ID_MARK_NOT_FOUND

No ID address mark was found on the floppy disk.

ERROR_FLOPPY_WRONG_CYLINDER

Mismatch between the floppy disk sector ID field and the floppy disk controller track address.

ERROR_FLOPPY_UNKNOWN_ERROR

The floppy disk controller reported an error that is not recognized by the floppy disk driver.

ERROR_FLOPPY_BAD_REGISTERS

The floppy disk controller returned inconsistent results in its registers.

ERROR_DISK_RECALIBRATE_FAILED

While accessing the hard disk, a recalibrate operation failed, even after retries.

ERROR_DISK_OPERATION_FAILED

While accessing the hard disk, a disk operation failed even after retries.

ERROR_DISK_RESET_FAILED

While accessing the hard disk, a disk controller reset was needed, but even that failed.

ERROR_EOM_OVERFLOW

Physical end of tape encountered.

ERROR_NOT_ENOUGH_SERVER_MEMORY

Not enough server storage is available to process this command.

ERROR_POSSIBLE_DEADLOCK

A potential deadlock condition has been detected.

ERROR_MAPPED_ALIGNMENT

The base address or the file offset specified does not have the proper alignment.

ERROR_SET_POWER_STATE_VETOED

An attempt to change the system power state was vetoed by another application or driver.

ERROR_SET_POWER_STATE_FAILED

The system BIOS failed an attempt to change the system power state.

ERROR_TOO_MANY_LINKS

An attempt was made to create more links on a file than the file system supports.

ERROR_OLD_WIN_VERSION

The specified program requires a newer version of Windows.

ERROR_APP_WRONG_OS

The specified program is not a Windows or MS-DOS program.

ERROR_SINGLE_INSTANCE_APP

Cannot start more than one instance of the specified program.

ERROR_RMODE_APP

The specified program was written for an earlier version of Windows.

ERROR_INVALID_DLL

One of the library files needed to run this application is damaged.

ERROR_NO_ASSOCIATION

No application is associated with the specified file for this operation.

ERROR_DDE_FAIL

An error occurred in sending the command to the application.

ERROR_DLL_NOT_FOUND

One of the library files needed to run this application cannot be found.

ERROR_NO_MORE_USER_HANDLES

The current process has used all of its system allowance of handles for Window Manager objects.

ERROR_MESSAGE_SYNC_ONLY

The message can be used only with synchronous operations.

ERROR_SOURCE_ELEMENT_EMPTY

The indicated source element has no media.

ERROR_DESTINATION_ELEMENT_FULL

The indicated destination element already contains media.

ERROR_ILLEGAL_ELEMENT_ADDRESS

The indicated element does not exist.

ERROR_MAGAZINE_NOT_PRESENT

The indicated element is part of a magazine that is not present.

ERROR_DEVICE_REINITIALIZATION_NEEDED

The indicated device requires reinitialization due to hardware errors.

ERROR_DEVICE_REQUIRES_CLEANING

The device has indicated that cleaning is required before further operations are attempted.

ERROR_DEVICE_DOOR_OPEN

The device has indicated that its door is open.

ERROR_DEVICE_NOT_CONNECTED

The device is not connected.

ERROR_NOT_FOUND

ERROR_NO_MATCH

There was no match for the specified key in the index.

ERROR_SET_NOT_FOUND

The property set specified does not exist on the object.

ERROR_POINT_NOT_FOUND

The point passed to GetMouseMovePoints is not in the buffer.

ERROR_NO_TRACKING_SERVICE

The tracking (workstation) service is not running.

ERROR_NO_VOLUME_ID

The Volume ID could not be found.

ERROR_UNABLE_TO_REMOVE_REPLACED

Unable to remove the file to be replaced.

ERROR_UNABLE_TO_MOVE_REPLACEMENT

Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.

ERROR_UNABLE_TO_MOVE_REPLACEMENT_2

Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.

ERROR_JOURNAL_DELETE_IN_PROGRESS

The volume change journal is being deleted.

ERROR_JOURNAL_NOT_ACTIVE

The volume change journal is not active.

ERROR_POTENTIAL_FILE_FOUND

A file was found, but it may not be the correct file.

ERROR_JOURNAL_ENTRY_DELETED

The journal entry has been deleted from the journal.

ERROR_SHUTDOWN_IS_SCHEDULED

A system shutdown has already been scheduled.

ERROR_SHUTDOWN_USERS_LOGGED_ON

The system shutdown cannot be initiated because there are other users logged on to the computer.

ERROR_BAD_DEVICE

The specified device name is invalid.

ERROR_CONNECTION_UNAVAIL

The device is not currently connected but it is a remembered connection.

ERROR_DEVICE_ALREADY_REMEMBERED

The local device name has a remembered connection to another network resource.

ERROR_NO_NET_OR_BAD_PATH

The network path was either typed incorrectly, does not exist, or the network provider is not currently available. Please try retyping the path or contact your network administrator.

ERROR_BAD_PROVIDER

The specified network provider name is invalid.

ERROR_CANNOT_OPEN_PROFILE

Unable to open the network connection profile.

ERROR_BAD_PROFILE

The network connection profile is corrupted.

ERROR_NOT_CONTAINER

Cannot enumerate a noncontainer.

ERROR_EXTENDED_ERROR

An extended error has occurred.

ERROR_INVALID_GROUPNAME

The format of the specified group name is invalid.

ERROR_INVALID_COMPUTERNAME

The format of the specified computer name is invalid.

ERROR_INVALID_EVENTNAME

The format of the specified event name is invalid.

ERROR_INVALID_DOMAINNAME

The format of the specified domain name is invalid.

ERROR_INVALID_SERVICENAME

The format of the specified service name is invalid.

ERROR_INVALID_NETNAME

The format of the specified network name is invalid.

ERROR_INVALID_SHARENAME

The format of the specified share name is invalid.

ERROR_INVALID_PASSWORDNAME

The format of the specified password is invalid.

ERROR_INVALID_MESSAGENAME

The format of the specified message name is invalid.

ERROR_INVALID_MESSAGEDEST

The format of the specified message destination is invalid.

ERROR_SESSION_CREDENTIAL_CONFLICT

Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.

ERROR_REMOTE_SESSION_LIMIT_EXCEEDED

An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.

ERROR_DUP_DOMAINNAME

The workgroup or domain name is already in use by another computer on the network.

ERROR_NO_NETWORK

The network is not present or not started.

ERROR_CANCELLED

The operation was canceled by the user.

ERROR_USER_MAPPED_FILE

The requested operation cannot be performed on a file with a user-mapped section open.

ERROR_CONNECTION_REFUSED

The remote computer refused the network connection.

ERROR_GRACEFUL_DISCONNECT

The network connection was gracefully closed.

ERROR_ADDRESS_ALREADY_ASSOCIATED

The network transport endpoint already has an address associated with it.

ERROR_ADDRESS_NOT_ASSOCIATED

An address has not yet been associated with the network endpoint.

ERROR_CONNECTION_INVALID

An operation was attempted on a nonexistent network connection.

ERROR_CONNECTION_ACTIVE

An invalid operation was attempted on an active network connection.

ERROR_NETWORK_UNREACHABLE

The network location cannot be reached. For information about network troubleshooting, see Windows Help.

ERROR_HOST_UNREACHABLE

The network location cannot be reached. For information about network troubleshooting, see Windows Help.

ERROR_PROTOCOL_UNREACHABLE

The network location cannot be reached. For information about network troubleshooting, see Windows Help.

ERROR_PORT_UNREACHABLE

No service is operating at the destination network endpoint on the remote system.

ERROR_REQUEST_ABORTED

The request was aborted.

ERROR_CONNECTION_ABORTED

The network connection was aborted by the local system.

ERROR_RETRY

The operation could not be completed. A retry should be performed.

ERROR_CONNECTION_COUNT_LIMIT

A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.

ERROR_LOGIN_TIME_RESTRICTION

Attempting to log in during an unauthorized time of day for this account.

ERROR_LOGIN_WKSTA_RESTRICTION

The account is not authorized to log in from this station.

ERROR_INCORRECT_ADDRESS

The network address could not be used for the operation requested.

ERROR_ALREADY_REGISTERED

The service is already registered.

ERROR_SERVICE_NOT_FOUND

The specified service does not exist.

ERROR_NOT_AUTHENTICATED

The operation being requested was not performed because the user has not been authenticated.

ERROR_NOT_LOGGED_ON

The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist.

ERROR_CONTINUE

Continue with work in progress.

ERROR_ALREADY_INITIALIZED

An attempt was made to perform an initialization operation when initialization has already been completed.

ERROR_NO_MORE_DEVICES

No more local devices.

ERROR_NO_SUCH_SITE

The specified site does not exist.

ERROR_DOMAIN_CONTROLLER_EXISTS

A domain controller with the specified name already exists.

ERROR_ONLY_IF_CONNECTED

This operation is supported only when you are connected to the server.

ERROR_OVERRIDE_NOCHANGES

The group policy framework should call the extension even if there are no changes.

ERROR_BAD_USER_PROFILE

The specified user does not have a valid profile.

ERROR_NOT_SUPPORTED_ON_SBS

This operation is not supported on a computer running Windows Server 2003 for Small Business Server.

ERROR_SERVER_SHUTDOWN_IN_PROGRESS

The server machine is shutting down.

ERROR_HOST_DOWN

The remote system is not available. For information about network troubleshooting, see Windows Help.

ERROR_NON_ACCOUNT_SID

The security identifier provided is not from an account domain.

ERROR_NON_DOMAIN_SID

The security identifier provided does not have a domain component.

ERROR_APPHELP_BLOCK

AppHelp dialog canceled thus preventing the application from starting.

ERROR_ACCESS_DISABLED_BY_POLICY

This program is blocked by group policy. For more information, contact your system administrator.

ERROR_REG_NAT_CONSUMPTION

A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.

ERROR_CSCSHARE_OFFLINE

The share is currently offline or does not exist.

ERROR_PKINIT_FAILURE

The Kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. There is more information in the system event log.

ERROR_SMARTCARD_SUBSYSTEM_FAILURE

The Kerberos protocol encountered an error while attempting to utilize the smartcard subsystem.

ERROR_DOWNGRADE_DETECTED

The system cannot contact a domain controller to service the authentication request. Please try again later.

ERROR_MACHINE_LOCKED

The machine is locked and cannot be shut down without the force option.

ERROR_CALLBACK_SUPPLIED_INVALID_DATA

An application-defined callback gave invalid data when called.

ERROR_SYNC_FOREGROUND_REFRESH_REQUIRED

The group policy framework should call the extension in the synchronous foreground policy refresh.

ERROR_DRIVER_BLOCKED

This driver has been blocked from loading.

ERROR_INVALID_IMPORT_OF_NON_DLL

A dynamic link library (DLL) referenced a module that was neither a DLL nor the process’s executable image.

ERROR_ACCESS_DISABLED_WEBBLADE

Windows cannot open this program since it has been disabled.

ERROR_ACCESS_DISABLED_WEBBLADE_TAMPER

Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.

ERROR_RECOVERY_FAILURE

A transaction recover failed.

ERROR_ALREADY_FIBER

The current thread has already been converted to a fiber.

ERROR_ALREADY_THREAD

The current thread has already been converted from a fiber.

ERROR_STACK_BUFFER_OVERRUN

The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.

ERROR_PARAMETER_QUOTA_EXCEEDED

Data present in one of the parameters is more than the function can operate on.

ERROR_DEBUGGER_INACTIVE

An attempt to do an operation on a debug object failed because the object is in the process of being deleted.

ERROR_DELAY_LOAD_FAILED

ERROR_VDM_DISALLOWED

%1 is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator.

ERROR_UNIDENTIFIED_ERROR

Insufficient information exists to identify the cause of failure.

ERROR_INVALID_CRUNTIME_PARAMETER

The parameter passed to a C runtime function is incorrect.

ERROR_BEYOND_VDL

The operation occurred beyond the valid data length of the file.

ERROR_INCOMPATIBLE_SERVICE_SID_TYPE

The service start failed since one or more services in the same process have an incompatible service SID type setting. A service with restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type for this service was just configured, the hosting process must be restarted in order to start this service.

On Windows ServerВ 2003 and WindowsВ XP, an unrestricted service cannot coexist in the same process with other services. The service with the unrestricted service SID type must be moved to an owned process in order to start this service.

ERROR_DRIVER_PROCESS_TERMINATED

The process hosting the driver for this device has been terminated.

ERROR_IMPLEMENTATION_LIMIT

An operation attempted to exceed an implementation-defined limit.

ERROR_PROCESS_IS_PROTECTED

Either the target process, or the target thread’s containing process, is a protected process.

ERROR_SERVICE_NOTIFY_CLIENT_LAGGING

The service notification client is lagging too far behind the current state of services in the machine.

ERROR_DISK_QUOTA_EXCEEDED

The requested file operation failed because the storage quota was exceeded. To free up disk space, move files to a different location or delete unnecessary files. For more information, contact your system administrator.

ERROR_CONTENT_BLOCKED

The requested file operation failed because the storage policy blocks that type of file. For more information, contact your system administrator.

ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE

A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the account configuration.

ERROR_APP_HANG

A thread involved in this operation appears to be unresponsive.

ERROR_INVALID_LABEL

Indicates a particular Security ID may not be assigned as the label of an object.

Источник